To ensure that the Mineral water Plants provide best quality of product the aspect of turnkey system has been adopted by IIECI. Along with this technique and the best materials from IIECI, then plants produce 100% high quality products. IIECI is the best in providing the water plants with various accessories which are involved in the treatment of water. Also, we manufacture the accessories which are needed for execution of the process of disinfection, pre-treatment and filtration. We have specialization in preparing those projects which have all the aspects of water treatment included.
1. The packages are absolutely sealed and they have the mark of ISO-9001 made in California, U.S.A.
2. Use of anthracite
3. The filter bag is of micron cartridge and is made in Suzuki, Japan.
1. During the fabrication of any unit
2. Inspection is done during the unit assembling.
3. During the fitting of the membrane sealed pack
4. Entire installation as well as operation of the plant. This process is carried out for 3 days
1. We have facility for clearing of membrane at out factory and it helps in enhancing its life.
2. From packaging to sealing, everything is provided by us on the basis of the turnkey technique.
3. At IIECI we have the facility of 70% recovery of the plant.
4. The blotting needs are met by providing a range of system.
5. The capacity of the plant is made to be 10% higher. The T.D.S is also kept at 2995 ppm to ensure better result in the future.
The maintenance of the plant doesn’t require any effort. We provide a zero maintenance policy. Also, the replacement for the consumable is very low. Also, the aspect of maintenance can be done by anyone.
|Sr.No.||Type of Machinery||500 LPH||1000 LPH||1500 LPH||2000 LPH||3000 LPH||Phase|
|1||Raw Water Pump||1 HP||1 ½ HP||1 ½ HP||2 HP||2 HP||III|
|2||High Pressure Pump||2 HP||3 HP||3 HP||5 HP||5 HP||III|
|3||Transfer Pump (RO to Post Treatment Plant)||HP||HP||HP||HP||HP||I|
|4||Ozone Circulation Pump||HP||HP||HP||HP||HP||I|
|5||Ozone Water Transfer Pump||1 HP||1 HP||1 HP||1 HP||1 HP||I|
|6||Pouch Packing Machine||1 HP||1 HP||1 HP||1 HP||1 HP||I|
|7||Bottle Filing and Washing Machine Fully Auto||6 HP||6 HP||6 HP||7 HP||7 HP||III|
|8||Bottle Filing and Washing Machine Semi Auto||3 HP||3 HP||3 HP||3 HP||3 HP||III|
|9||Jar Washing Machine||2 HP||2 HP||2 HP||2 HP||2 HP||I|
|10||Chilling Machine||5 HP||10 HP||10 HP||10 HP||10 HP||III|
|11||Blow Moulding M/c||22 HP||22 HP||22 HP||22 HP||22 HP||III|
1. The requirement for the Phase I is that of 4 to 5 HP.
2. The Phase III requirement is that of 14 HP.
3. The requirements for the laboratory is that of Phase I for the connection no 20. The connection has 15 amp sockets.